Write Your Own Review
The Polylok 24" riser kit comes complete with everything needed to install a septic tank riser system in your application. This package gives you approximately 8" in height. Additional 24" Polylok risers can be purchased and stacked on to this kit.
Optional 24"x12", 24"x6", 24"x3", and 24"x2" risers are available for this kit.
1. Locate adapter ring over access opening on top of tank
2. Using a 1/4" masonry bit, drill 8 holes 1-1/4" deep on top of tank
3. Clean under surface of adapter ring apply foam gasket or butyl
4. Position adapter ring over opening, using 1/4" anchors, tap anchors into drilled holes and tighten with wrench
5. Position appropriate riser and or cover and screw onto the adapter ring to provide a watertight connection
Note: These items should be installed by a professional septic tank installer or pumper. These are not intended to be installed by a homeowner.